AZUD LUXON LXE
Automatic electric screen filters suitable for all applications, and available in a wide range of micron sizes, all with the same high quality guarantee of AZUD.
Advantage
-
Energy efficient
The consumption of water in the flushing cycle is minimal. -
Wide selection of screens
From 10 to 1.000 micron. -
Versatility
From 3″ to 20″. -
Resistance
Tempertures to 60ºC. -
Large screen area
Up to 21.300 cm2. -
Resistant material
The screen is manufactured in high quality stainless steel. -
Time saving
The filtration process and the flushing cycle occur simultaneously. -
Easy installation
The filters are delivered to be installed.
Specifications
- LXE 2700 S
- LXE 5400 S
- LXE 8000 S
- LXE 10600 S
- LXE 13200 S
- LXE 16500 S
- LXE 21300 S
Screen support
Stainless steel
Manifold
3″ – 4″ – 6″
Filtration area (cm²)
2650
Screen support
Stainless steel
Manifold
4″ – 6″ – 8″
Filtration area (cm²)
5380
Screen support
Stainless steel
Manifold
6″ – 8″ – 10″ – 12″
Filtration area (cm²)
7990
Screen support
Stainless steel
Manifold
8″ – 10″ – 12″ – 14″
Filtration area (cm²)
10600
Screen support
Stainless steel
Manifold
8″ – 10″ – 12″ – 14″
Filtration area (cm²)
13200
Screen support
Stainless steel
Manifold
8″ – 10″ – 12″ – 14″ – 16″
Filtration area (cm²)
16500
Screen support
Stainless steel
Manifold
10″ – 12″ – 14″ – 16″ – 18″ – 20″
Filtration area (cm²)
21300
Additional Info.
FILTRATION PHASE
Raw water enters from the inlet manifold to the coarse screen,trapping larger particles that could interfere with the filtercleaning mechanism -in vertical models, large and heavyparticles are separated by gravity.
Then water flows IN-OUT through the weave wire screen, trapping in the inner screen surface bigger particles than the filtration degree. Clean waterflows out through the outlet manifold . Particles build-up createsa filter cake that increases the pressure differential between inletand outlet, and this activates the cleaning cycle when the pre-setpoint is reached.
SELF-CLEANING PHASE
Clean water supply is not interrupted when the cleaning cycle isactivated. The cleaning phase starts with the opening of the drainvalve, that creates a pressure gradient between the pressurizedinner filter and the atmosphere. At the same time, the suctionnozzle scanner spirals along the complete inner surface of the screen.
As a result of the pressure difference, a high velocity SuctionEffect is created at the inlet of the nozzles, making the waterflows OUT- IN through the filter element and vacuuming all theparticles retained on the screen surface.
Before continuing, subscribe to the AZUD YouTube channel
If you do not want to miss any of the interviews, news and news about our company, click on the button and subscribe to the channel.